So if you can not see the adhesive you are looking for contact our friendly sales team for free advice. We have a large range of: foam pads, in our Leicester warehouse, ready to be dispatched - normally - within 2-3 days. PSA Solutions Ltd, are a double sided sticky foam pads supplier, based in Leicestershire, UK. Who are Pressure Sensitive Adhesive Solutions? Our extra strong foam pads consist of adhesive pads in the following sizes: These self adhesive pads are ideal for being used for or with: Simply put the more you buy, the more you save. If you are looking to buy these adhesive foam pads in bulk, every option we have on offer comes with bulk buying options.

This is then supported using a white 80gsm glassine release liner. These two sided adhesive pads consist of: a 3mm white 33 & 67kg/m 3, cross-linked, closed cell, polyethene foam coated on both sides with a hot melt rubber resin adhesive system. Main features of these types of double sided sticky Rubber Pads (Foam) We have a large selection sourced from some of the best global double sided sticky foam pad manufacturers. used for holding glass while grinding, comes in different hardness.Hotmelt Rubber Adhesive Double Sided Sticky Foam Pads are ideal for: mounting nameplates, card making, arts & crafts (creating 3D effects), packaging, assembly (product placement), Point Of Sale (POS), sign mounting, nameplates and decals, mirror mounting & fixing, mounting hooks and clips & lots of other similar applications. Telescope making supplies check section on Rosin, Pitch, Beeswax, and Blocking Pitch

i believe the expansion difference in aluminum and steel and the fact that the 'glue' had no give to it. on bringing the slightly warm piece to the sink to cool under cold water. I once used regular hot melt glue to stick aluminum to steel. There are sticky wax, wax sticks, wax tapes that are like used like melted shellac flakes to stick stuff together and when done items are heated or soaked in alcohol or other solvent to dissolve the glue.

if anything this stuff sticks so well you might have problems peeling delicate stuff off without soaking in a solvent. Tape sticks good, has enough give to it not not break holding bond easily. it is nice if cutting out a circle the center circle slug does not move around when the circle is completely cut. i can cnc cut simple shapes with 1/4' carbide endmill. thin enough to not move much but foam allows sticking slightly irregular surfaces.įor example i stick 1/4' aluminum to a wood 2x4 which is held in a mill vise. I use 3M 4032, double sided 1/32' foam tape. Had to heat the tar out of it and pop it off using a scraper under the corner of the part though! Went to a different brand of Super Glue and got the part cut with no problem.

Never used it for such a job, but it REALLY sticks, and I figured I'd ruin the part trying to get it unstuck! I was also concerned with the slight sponginess allowing the part to move. I looked at my 3M two sided tape, the kind that is about 1/2' wide and 1/16' thick, and is somewhat spongy. Got it face milled and stepped, and shortly after I started to profile it, (1/4' end mill) it popped off the plate! Time to go home. I face milled a bed plate, (CNC Mill) cleaned everything up and stuck the part blank down using half a dozen drops of Super Glue. 160' material, so it needed facing as well as the step, so I figured the easiest way would be to stick it down to a bed plate for unobstructed tool access. 140' thick aluminum part with a window in it. I had one of those little one hour jobs over the weekend that took half a day.ģ' x 8' x. What type of two sided tape sticks well enough to enable machining, but releases without rolling up the part?

Two sided sticky pads